OEM Famous MCB Companies – Self-Supporting Aluminum Cable – Holley

Product Detail

Product Tags

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Low cost meter, Prepayment management solution, Commercial and industrial meter, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!

OEM Famous MCB Companies – Self-Supporting Aluminum Cable – Holley Detail:

Specifications

	DESCRIPTION	UNIT	VALUE	VALUE	VALUE	VALUE	VALUE
1	GENERAL		3×35 + 1×16 + NA25 mm2	3×50 + 1×16 + NA35mm2	3×70 + 1×16 + NA50 mm2	3×25 + 1×16 + NA25 mm2	3X120 + 1X16 + NA70 mm2
	Manufacturing standard		NTP 370.254	NTP 370.254	NTP 370.254	NTP 370.254	NTP 370.254
2	DESIGNATION		CAAI	CAAI	CAAI	CAAI	CAAI
	Rated Voltage Uo / U	kV	0.6 / 1	0.6 / 1	0.6 / 1	0.6 / 1	0.6 / 1
3	TERMS OF USE
	Maximum temperature in permanent regime.	° C	90	90	90	90	90
	Maximum temperature in overload regime.	° C	130	130	130	130	130
	Maximum temperature in short-circuit mode (5 s)	° C	250	250	250	250	250
4	CABLES GATHERING:
	Maximum wireways, depending on the diameter of thePhase wire	Times	60	60	60	60	60
5	PHASE CABLE:
	Standard		NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228
	Material		Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated Aluminum
	Nominal section	mm2	35	50	70	25	120
	Class		2	2	2	2	2
	Minimum number of wires	No.	7	6	12	6	15
	Maximum electrical resistance in DC at 20 ° C	Ohm / km	0.868	0.641	0.443	1.20	0.253
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.52	1.52	1.14	2.03
	Minimum thickness at one point	mm	1.03	1.37	1.37	1.03	1.83
6	STREET LIGHT CABLE
	Standard		NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP 370.250
	Material		Pure Aluminum without Coating	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum
	Nominal section	mm2	16	16	16	16	16
	Class		2	2	2	2	2
	Minimum number of wires	No.	7	6	6	6	6
	Maximum electrical resistance in DC at 20 ° C	Ohm / km	1.91	1.91	1.91	1.91	1.91
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.14	1.14	1.14	1.14
	Minimum thickness at one point	mm	1.03	1.03	1.03	1.03	1.03
7	NEUTRAL CABLE SUPPORT
	Standards		NTP 370.258	NTP 370.258	NTP 370.258	NTP 370.258	NTP 370.258
	Cable Material		Aluminium alloy	Aluminium alloy	Aluminium alloy	Aluminium alloy	Aluminium alloy
	Conductivity	% IACS	52.5	52.5	52.5	52.5	52.5
	Nominal section	mm2	25	35	50	25	70
	Number of wires		7	7	7	7	7
	Wire diameter	mm	2.13	2.52	3,023	2.13	3.57
	Minimum tensile strength	kN	7.72	10.81	15.44	7.72	20.95
	Nominal Mass	kg / km	68.4	95.7	136.8	68.4	191.5
	Density at 20 ° C	kg / m3	2703	2703	2703	2703	2703
	Electrical resistivity at 20 ° C	Ωmm2 / m	0.032840	0.032840	0.032840	0.032840	0.032840
	Maximum electrical resistance in DC at 20 ° C	Ω / km	1.3511	0.9651	0.6755	1.3511	0.4825
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.14	1.52	1.14	1.52
	Minimum thickness at one point	mm	1.03	1.03	1.37	1.03	1.37

Product detail pictures:

Related Product Guide:

Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for OEM Famous MCB Companies – Self-Supporting Aluminum Cable – Holley , The product will supply to all over the world, such as: Paraguay, Macedonia, UK, Nowadays our products sell all over the domestic and abroad thanks for the regular and new customers support. We provide high quality product and competitive price, welcome the regular and new customers cooperate with us!

AMI solution

HES

Light duty suspension hook

Miniature Circuit Breaker

Molded case circuit breaker

Nut hook

Self-supporting cable

Suspension and tension clamps

Tension clamps

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Frederica from Costa Rica - 2018.09.16 11:31

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!

By Delia Pesina from Frankfurt - 2017.08.18 18:38

Write your message here and send it to us