-
In Home Display (IHD)
Type:
HAD23Overview:
The IHD is an indoor display device which can receive the electricity consumption and alarming from the smart meter and scroll display. Moreover, the IHD can send data requirement and relay connection request by pressing the button. Flexible communication mode is supported, P1 communication or wireless RF communication that can widely use with different energy measurement devices. Multiple type power supply can be used for it. The IHD has the advantage of plug and play, low cost, more flexibility. The users can check the electricity data, power quality in real-time in home. -
DTSD546 Three Phase Four Wire Socket Type (16S/9S) Static TOU Meters
Type:
DTSD546
Overview:
DTSD546 Three Phase Four Wire Socket Type (16S/9S) Static TOU Meters are designed to be used in industrial power systems. The meters support active and reactive energy metering and billing, TOU, maximum demand, load profile and event log. The meters are with CA 0.2 accuracy as specified by ANSI C12.20. Two-way optical communication as per ANSI C12.18/ANSI C12.19 is available. The meters are type approved by UL and are suitable for outdoor installation complying to UL50 Type 3 Enclosure requirement.
-
DIN Rail Single Phase Split Prepayment Energy Meter with Bottom Wiring
Type:
DDSY283SR-SP46Overview:
DDSY283SR-SP46 is a new generation of advanced single-phase two-wire, multi-function, split-type, dual-circuit metering prepaid energy meter. It fully complies with the STS standard. It can complete the prepayment business process and reduce the power company’s bad debt losses. The meter has high accuracy, low power consumption, and a CIU display unit, which is convenient for users to operate. The power company can choose different communication media to communicate with the data concentrator or CIU according to the requirements of them, such as PLC, RF and M-Bus. It is suitable for residential and commercial users. -
Single Phase Electricity Smart Meter
Type:
DDSD285-S16Overview:
DDSD285-S16 single phase electricity smart meter is designed for smart grids. It can not only accurately measure power consumption information, but also detect power quality parameters in real time. Holley smart meter integrates flexible communication technology supports interconnection in different communication environments. It supports remote data upload and remote relay switch off and on. It can reduce Power Company operating costs and realize demand side management; it also can realize remote firmware upgrade and rate distribution, which is convenient for power company operation and maintenance. The meter is an ideal residential and commercial product. -
ANSI Standards Socket Base Electricity Meter
Type:
DDSD285-S56 / DSSD536-S56Overview:
DDSD285-S56 / DSSD536-S56 are the high-performance and high-precision electronic energy meter designed in accordance with ANSI standards. It is suitable for Socket Base home, outdoor/indoor commercial use. Its accuracy is better than the 0.5 level specified by ANSI C12.20, and the wide working voltage is AC120V~480V.It supports ANSI type 2 optical communication interface, and includes AMI expansion interface. It is a high-end ANSI electronic energy meter for smart grid. The meter supports multi-channel metering channels and multi-channel demand can be set, it supports TOU, instantaneous value, load profile, event detection, connection and disconnection function. -
Three Phase Smart Prepayment Card Meter
Type:
DTSY541-SP36Overview:
DTSY541-SP36 three phase smart prepayment card meter is a new generation of smart energy meters, with stable performance, rich functions, strong anti-interference ability, and careful design in terms of convenient operation and data security. It adopts a fully sealed structure and shell, which can meet the severe high and low temperature alternating humidity and heat environment. The meter supports multiple communication methods to connect to the concentrator, such as PLC/RF or directly using GPRS. At the same time, the meter can also be used with CIU. It is an ideal product for commercial, industrial and residential use. -
Single Phase Static DIN Standard Electronic Meter
Type:
DDZ285-F16Overview:
DDZ285-F16 single phase meter is mainly used in the European market and is a major part of the European smart grid.DDZ285-F16 realizes the transmission and interaction of external data through the SML protocol, including two communication channels of INFO and MSB. It supports import and export active energy metering, rate metering, daily freezing, and PIN display protection. This meter can be used for residential and commercial users. -
Single Phase Multi-Functional Meter
Type:
DDSD285-F16Overview:
DDSD285-F16 is a new generation of advanced multiple functional single phase two wires, anti-tamper, smart energy meter. The meter can realize the function of automatically data reading.DDSD285-F16 has excellent anti-tamper feature like anti-bypass feature and terminal cover open detection sensor. For the measurement, it meters the active energy in two directions. Moreover, the meter also supports optical and RS485 communication. It is suitable for residential and commercial users especially in school, apartment projects, etc. -
Three Phase Static DIN Standard Electronic Meter
Type:
DTZ541-F36Overview:
DTZ541-F36 three phase meter is mainly used in the European market and is a major part of the European smart grid.DTZ541-F36 realizes the transmission and interaction of external data through the SML protocol, including three communication channels of INFO, LMN, and LORA. It supports positive and negative active energy metering, rate metering daily freezing, anti-theft detection, and PIN display protection. This meter can be used for residential and commercial users. -
Three Phase Multi-functional Electricity Meter
Type:
DTS541-D36Overview:
DTS541-D36 three phase meter is a new generation electronic meter, which is designed for measuring energy consumption in three-phase services. Low power consumption, low cost is its advantages. It metering with management applications in IEC compliant countries. The meter provides the utilities and users over the entire life time with good features including high accuracy, reliability, serviceability, and cost-effectiveness. It is suitable for residential and commercial users. -
Customer Interface Unit of Prepayment Meter
Type:
HAU12Overview:
The CIU display unit is the customer interface unit using together with prepayment meter to monitor energy and charge the credit. Using in conjunction with the MCU base meter, can be used by customers to query electricity consumption information and meter fault information. When the remaining amount of the meter is insufficient, the TOKEN code can be recharged successfully through the keyboard. Also it has the feature like alarm with buzzer and LED indicator. -
Three Phase Smart Prepayment Keypad Meter
Type:
DTSY541SR-SP36Overview:
DTSY541SR-SP36 three phase smart prepayment keyboard meter is a new generation of smart energy meters, with stable performance, rich functions, strong anti-interference ability, and careful design in terms of convenient operation and data security. It adopts a fully sealed structure and shell, which can meet the severe high and low temperature alternating humidity and heat environment. The meter supports multiple communication methods to connect to the concentrator, such as PLC/RF, or directly using GPRS. At the same time, the meter comes with a keyboard for token input, which can also be used with CIU. It is an ideal product for commercial, industrial and residential use.
