China OEM P1 Customer interface Factories – Self-Supporting Aluminum Cable – Holley

Product Detail

Product Tags

Feedback (2)

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for CTPT meter, Meter Data Acquisition Software, Conventional meter, Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!

China OEM P1 Customer interface Factories – Self-Supporting Aluminum Cable – Holley Detail:

Specifications

	DESCRIPTION	UNIT	VALUE	VALUE	VALUE	VALUE	VALUE
1	GENERAL		3×35 + 1×16 + NA25 mm2	3×50 + 1×16 + NA35mm2	3×70 + 1×16 + NA50 mm2	3×25 + 1×16 + NA25 mm2	3X120 + 1X16 + NA70 mm2
	Manufacturing standard		NTP 370.254	NTP 370.254	NTP 370.254	NTP 370.254	NTP 370.254
2	DESIGNATION		CAAI	CAAI	CAAI	CAAI	CAAI
	Rated Voltage Uo / U	kV	0.6 / 1	0.6 / 1	0.6 / 1	0.6 / 1	0.6 / 1
3	TERMS OF USE
	Maximum temperature in permanent regime.	° C	90	90	90	90	90
	Maximum temperature in overload regime.	° C	130	130	130	130	130
	Maximum temperature in short-circuit mode (5 s)	° C	250	250	250	250	250
4	CABLES GATHERING:
	Maximum wireways, depending on the diameter of thePhase wire	Times	60	60	60	60	60
5	PHASE CABLE:
	Standard		NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228
	Material		Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated Aluminum
	Nominal section	mm2	35	50	70	25	120
	Class		2	2	2	2	2
	Minimum number of wires	No.	7	6	12	6	15
	Maximum electrical resistance in DC at 20 ° C	Ohm / km	0.868	0.641	0.443	1.20	0.253
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.52	1.52	1.14	2.03
	Minimum thickness at one point	mm	1.03	1.37	1.37	1.03	1.83
6	STREET LIGHT CABLE
	Standard		NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP 370.250
	Material		Pure Aluminum without Coating	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum
	Nominal section	mm2	16	16	16	16	16
	Class		2	2	2	2	2
	Minimum number of wires	No.	7	6	6	6	6
	Maximum electrical resistance in DC at 20 ° C	Ohm / km	1.91	1.91	1.91	1.91	1.91
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.14	1.14	1.14	1.14
	Minimum thickness at one point	mm	1.03	1.03	1.03	1.03	1.03
7	NEUTRAL CABLE SUPPORT
	Standards		NTP 370.258	NTP 370.258	NTP 370.258	NTP 370.258	NTP 370.258
	Cable Material		Aluminium alloy	Aluminium alloy	Aluminium alloy	Aluminium alloy	Aluminium alloy
	Conductivity	% IACS	52.5	52.5	52.5	52.5	52.5
	Nominal section	mm2	25	35	50	25	70
	Number of wires		7	7	7	7	7
	Wire diameter	mm	2.13	2.52	3,023	2.13	3.57
	Minimum tensile strength	kN	7.72	10.81	15.44	7.72	20.95
	Nominal Mass	kg / km	68.4	95.7	136.8	68.4	191.5
	Density at 20 ° C	kg / m3	2703	2703	2703	2703	2703
	Electrical resistivity at 20 ° C	Ωmm2 / m	0.032840	0.032840	0.032840	0.032840	0.032840
	Maximum electrical resistance in DC at 20 ° C	Ω / km	1.3511	0.9651	0.6755	1.3511	0.4825
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.14	1.52	1.14	1.52
	Minimum thickness at one point	mm	1.03	1.03	1.37	1.03	1.37

Product detail pictures:

Related Product Guide:

As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for China OEM P1 Customer interface Factories – Self-Supporting Aluminum Cable – Holley , The product will supply to all over the world, such as: Iceland, Ukraine, Sydney, We honor ourselves as a company that comprises of a strong team of professionals who are innovative and well experienced in the international trading, business development and product advancement. Moreover, the company stays unique among its competitors due to its superior standard of quality in production, and its efficiency and flexibility in business support.

AMI software

Automatic Message Recording

Field data management

MDM

PLC CIU

RF module

Rogowski coil

Self-supporting cable

Smart communication

Symmetry connection

Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.

By Michelle from Malta - 2018.12.14 15:26

This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!

By Miriam from kazakhstan - 2018.09.23 18:44

Write your message here and send it to us