China OEM Bushing Factories – Self-Supporting Aluminum Cable – Holley

Product Detail

Product Tags

Feedback (2)

Our company sticks into the basic principle of "Quality is definitely the life of the business, and status may be the soul of it" for RF UIU, Combined transformer, 1 phase electricity meter, We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business.

China OEM Bushing Factories – Self-Supporting Aluminum Cable – Holley Detail:

Specifications

	DESCRIPTION	UNIT	VALUE	VALUE	VALUE	VALUE	VALUE
1	GENERAL		3×35 + 1×16 + NA25 mm2	3×50 + 1×16 + NA35mm2	3×70 + 1×16 + NA50 mm2	3×25 + 1×16 + NA25 mm2	3X120 + 1X16 + NA70 mm2
	Manufacturing standard		NTP 370.254	NTP 370.254	NTP 370.254	NTP 370.254	NTP 370.254
2	DESIGNATION		CAAI	CAAI	CAAI	CAAI	CAAI
	Rated Voltage Uo / U	kV	0.6 / 1	0.6 / 1	0.6 / 1	0.6 / 1	0.6 / 1
3	TERMS OF USE
	Maximum temperature in permanent regime.	° C	90	90	90	90	90
	Maximum temperature in overload regime.	° C	130	130	130	130	130
	Maximum temperature in short-circuit mode (5 s)	° C	250	250	250	250	250
4	CABLES GATHERING:
	Maximum wireways, depending on the diameter of thePhase wire	Times	60	60	60	60	60
5	PHASE CABLE:
	Standard		NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228
	Material		Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated Aluminum
	Nominal section	mm2	35	50	70	25	120
	Class		2	2	2	2	2
	Minimum number of wires	No.	7	6	12	6	15
	Maximum electrical resistance in DC at 20 ° C	Ohm / km	0.868	0.641	0.443	1.20	0.253
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.52	1.52	1.14	2.03
	Minimum thickness at one point	mm	1.03	1.37	1.37	1.03	1.83
6	STREET LIGHT CABLE
	Standard		NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP IEC 60228	NTP 370.250
	Material		Pure Aluminum without Coating	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum	Pure uncoated aluminum
	Nominal section	mm2	16	16	16	16	16
	Class		2	2	2	2	2
	Minimum number of wires	No.	7	6	6	6	6
	Maximum electrical resistance in DC at 20 ° C	Ohm / km	1.91	1.91	1.91	1.91	1.91
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.14	1.14	1.14	1.14
	Minimum thickness at one point	mm	1.03	1.03	1.03	1.03	1.03
7	NEUTRAL CABLE SUPPORT
	Standards		NTP 370.258	NTP 370.258	NTP 370.258	NTP 370.258	NTP 370.258
	Cable Material		Aluminium alloy	Aluminium alloy	Aluminium alloy	Aluminium alloy	Aluminium alloy
	Conductivity	% IACS	52.5	52.5	52.5	52.5	52.5
	Nominal section	mm2	25	35	50	25	70
	Number of wires		7	7	7	7	7
	Wire diameter	mm	2.13	2.52	3,023	2.13	3.57
	Minimum tensile strength	kN	7.72	10.81	15.44	7.72	20.95
	Nominal Mass	kg / km	68.4	95.7	136.8	68.4	191.5
	Density at 20 ° C	kg / m3	2703	2703	2703	2703	2703
	Electrical resistivity at 20 ° C	Ωmm2 / m	0.032840	0.032840	0.032840	0.032840	0.032840
	Maximum electrical resistance in DC at 20 ° C	Ω / km	1.3511	0.9651	0.6755	1.3511	0.4825
	Insulation
	Material		Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE	Cross-linked polyethylene XLPE
	XLPE requirement		According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254	According to table 2 of NTP 370.254
	Minimum content of carbon black in XLPE	%	2	2	2	2	2
	Minimum average thickness	mm	1.14	1.14	1.52	1.14	1.52
	Minimum thickness at one point	mm	1.03	1.03	1.37	1.03	1.37

Product detail pictures:

Related Product Guide:

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for China OEM Bushing Factories – Self-Supporting Aluminum Cable – Holley , The product will supply to all over the world, such as: Indonesia, Japan, St. Petersburg, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good solutions quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!

CT/VT compartment

Data collection unit

Expulsion fuse cutout

Head End System

IHD

Medium voltage cable

Miniature Circuit Breaker

Ring main unit

Suspension and tension clamps

Test Terminal Block

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.

By Ophelia from Naples - 2017.12.31 14:53

The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.

By Maggie from kazan - 2018.09.29 13:24

Write your message here and send it to us